DC Central WHATS HOT Whats New Retired Community Museums Submissions 
   Welcome   Links   Safety Center  INSURV  Annoucements  Twitter  Advisor Group  Retirees   Contractors  
maritime DC & PPE Information Center
personnel protection

Stealth Light
NSN 1HM0099-LL-H62-5258



The fully adjustable stainless steel bracket attaches the Stealth Light to firefighter helmets by tightening down on the screws. The bracket is tightened with an Allen wrench, which is included. The Stealth Light is watertight to 500 feet (152 m) and is fabricated with an ABS plastic resin body and fitted with a high-impact polycarbonate lens that has a Xenon Laser Spot lamp module with white collimated beam. It has a one-hand safety switch and double-shock-mounted battery compartment. It uses four “AA” batteries that provide power for about five or six hours. The Stealth Light is FM-, CSA- and MSHA approved non-incendive and is about 6 1/2 inches long (17 cm).

The Stealth Light weighs 6 ounces and the stainless steel bracket set weighs about 2 ounces. It replaces the old head lantern in the firefighting/access personnel kit. These lights are provided in the firefighting/access personnel kit.


Note: Drilled holes into the firefighting helmet are not allowed.

Components (Click to enlarge)

Image ofStealth Light indicating Kens, Lens Cap, On/Off Switch, and Body. Image of Bracket indicating Light Body Securing Screw, Light Body Holder, Light Holder to Helmet Bracket Screw, and Helmet Attaching Screws. Image of Helmet with attached Stealth Light.